HOME > Power System > Power Meter > Multifunctional Power Quality Meter > Multifunctional Power Quality Meter HC 6010

About Power Meter HC 6010
HC 6010 power meters are conceptualized and intelligent to revolutionize the approach to traditional power metering. Each power meter is a compact, electronically advanced and programmable multi-display metering device (MDMD). It is the answer to future generation of electrical metering needs and methodology.

Environmental Impact & Cost Saving
A power meter can replace many units of conventional analog or digital instruments and change over switches (e.g. Amp, Volt, KVA, KW, PF, KWH, KVarH, FQ etc.). This saves on the wiring material usage and reduces the cost on metering needs. With the power meter modern and practical MDMD, the front layout of switch boards and control panels are aesthetically refined.

Increase Productivity & Efficiency
The power meters are specifically designed to be compatible with the worldˇ¦s 2 most widely used DIN standard panel instruments (It fits the DIN 92 x 92 mm panel cutout holes). The power meter as a MDMD greatly reduced cabling complexity and time. It is also a standardize hardware suitable for either 1 phase 2 wires, 1 phase 3 wires, 3 phase 3 wire or 3 phase 4 wires networks.

Improved Technical Superiority and Reliability
The power meters are endowed with technical specifications, (overload capabilities, accuracy levels, long term stability, readout dependability etc.) far exceeding those of conventional instruments. To overcome the critiques of digital metering, the power meter MDMD supports a VFD (Vacuum Fluorescent Display) screen with green (naturally comfortable) alphanumeric readouts. This allows visual clarity at long distance yet avoid parallax errors for close range viewing. The multi-display readings can be ˇ§dampedˇ¨ through it readout resolution besides the option to manually or automatically prioritize and sequentially view the more than 30 electrical parameters. To meet future metering environments, the power meter is equipped with a serial port (RS-485 or RS-232), to allow connection to an open architecture computerized network. Running on PC or data acquisition system and complying with Modbus(R) protocol. The software provides a simple yet practical solution to energy management in factories and plant, small industries, building services, etc.

Parameter Conversion
The microprocessor-based power meter now provides compatibility with the modicon Modbus(R) system as a standard featured. From the VFD multi-display reading V, A, VA, W, Var, WH, etc. more than 30 power and energy parameters. Via the RS-485 Modbus(R) communications, including the instant maximum and minimum of all parameters, maximum demand control, time stamping, etc. more than 90 parameters can be achieved by remote monitoring system.

Multifunctional Power Quality Meter HC 6010

 

Features
  • Over 90 power and energy parameters
  • For factory and building automation
  • Modbus(R) RTU protocol
  • 5A / 1A auto-range
  • Maximum 600V auto-range 10~150V / 600V
  • True RMS conversion
  • Instant maximum and minimum
  • VFD display clear and long-life
  • Build in RTC (real time clock)
  • Field programmable PT / CT ratio
  • Accuracy up to 0.15%
  • 4 isolated analog outputs to transducer function
  • 4 pulse outputs based on KWH, KVarH, KVAH or AH
  • Maximum demand control applicable
  • Memory for all setup and energy data
  • Comprehensive self test diagnostics
  • Low input burden 0.1VA (5A / 120V)
  • Wide power supply range 80~260V AC / DC
  • Compact physical configuration
  • Compatible for DIN & ANSI cut out
  • 2KV RMS input / output / power isolation
Model & Ordering

Specification

    Input
  • Range
    • Voltage : 10~600V
    • Current : Suitable for CT secondary rating(optional), Maximum 6A for 5A rating, Maximum 1.2A for 1A rating
    • Frequency 40-70Hz
  • Burden
    • Voltage < 0.4VA at 600V, < 0.04VA at 150V
    • Current < 0.1VA at 5A
    • Frequency 40-70Hz
  • Overload rating
  •