|
Features
- Wide switchable output ranges 0 to 40-10KHZ
- Switchable output setting Hi-set or Lo-set
- Potentiometer setting with 100% for input scale
- With discriminator-adjustable input sensitivity
- With intensed filter-selectable
- F-V/crystal heart conversion long term stability guaranteed
|
|
Model & Ordering
 |
|
Specification
- Accuracy : 0.25% fs of setting
- Linearty & repeatability : 0.15% typically
- Temperature stability < 0.007% of fs per oC
- Configuration :
- Switchable input ranges 0~40 to 0~10 Khz
- Switchable output setting
- Hi-set......input > setting, relay energied
- Lo-set......input < setting, relay energied
- + 15% adjustability.......fine span & zero
- Setting : Potentionmeter-10 turns, wirewound, 100% dial scale
- Power effect < 0.003% for per volt change
- Response time :
- < 1~1.5 second typical...non intensed filter on
- < seconds.............intensed filter on
- Input sensing :
- Input types
- Voltage...........unipolar/bipolar
- Signal.............square pulse or sinusoidal signal open collector
- Sensitivity......10mV~5V............adjustable
- 1V.........at factory calibration
- Maximum over.......100V maximum continuous
- Exciting : +12 V DC,drive capability 20 mA maximum
- Output :
- Relay contacts SPDT, maximum drive-resistive loa
- 250Vac 2 amperes, 125V AC 3 amperes
- Dielectric strength :
- 1500V AC.......power/input & output terminals
- 1600V AC.......input/output terminals
- Operating condition : Temperature range -5 ~ 55oC, humidity 20~95% RH non - condensed
- Storage condition : Temperature range -10 ~ 70oC, humidity 20~95% RH non - condensed
- Power supply :
- + 20% of rated , less 3.5 VA for AC input
- + 20% of rated , less 3.5 watt for DC input
- Construction : Socket / plug in type with barrier terminals
|
|
