|
Model & Ordering
 |
|
Specification
- Accuracy ( 23 + 5 oC ) : 0.2% RO
- Linearty & repeatability : 0.1% typical
- Temperature stability : Maximum 0.008% ro per degree C
- Configuration :
- Two wires or three wires connection
- Excitation 5 / 0.5mAdc constant current source
- Field rangeability :
- Selectable output mode for voltage or current mode
- Switchable of input ranges & output ranges
- Switchable AC power for 110V or 220V
- Effect of wire resistance :
- Automatically eliminated for 3 wire connection
- Offset recalibration required as for 2 wire connection
- Input break detection : Hi-set > 110% of rated output
- Power effect : Less 0.003% for per volt change
- Output drive capability : Maximum 10mA for voltage mode, maximum 10V for current mode
- Response time & ripple : Less 400ms typically, ripple less 0.1% rms of span
- Common mode rejection : 80db 50 / 60Hz
- Dielectric strength : 3.5KV rms AC between input / output / power / case
- Impulse & surge test : IEEE 587 / 1983 or IEC 255-3
- Storage condition : Temperature range -25 to +70oC, RH 20 to 95% non condensed
- Operating condition : Temperature range -20 to +65oC, RH 20 to 95% non condensed
- Power supply : +20% of rating, < 3.5VA
- Dimension : W*H*D : 12T (60.6mm) * 3U (128.5mm) * 238mm
|
|
