|
Model & Ordering
 |
|
Specification
- Accuracy ( 23 + 5 oC ) : 1% RO
- Linearty & repeatability : 0.5% typical
- Maximum converting range : 330o + 30o
- Temperature stability : Less 0.002% ro per degree C
- Input burden : Less 0.2VA for stator & rotor
- Field rangeability : Selectable input range by internal dip switches
- Output impedance : > 30 Meagohms
- Power effect : Less 0.003% for per volt change
- Response time & ripple : Less 600ms typically, ripple less 0.2% rms of span
- Output drive capability : Maximum 5mA for voltage mode, maximum 10V for current mode
- Common mode rejection > 100db DC to 60Hz
- Dielectric strength :
- 4KV AC rms 1 minute between terminals to case IEC 688
- 2KV AC rms 1 minute between input / output / power IEC 688
- Impulse & surge test : ANSI C37.90 / 1989, IEC 255-3
- Storage condition : Temperature range -25 to +70oC, RH 20 to 95% non condensed
- Operating condition : Temperature range -20 to +65oC, RH 20 to 95% non condensed
- Power supply : +20% of rating, < 3.5VA
- Dimension : W*H*D : 12T (60.6mm) * 3U (128.5mm) * 238mm
|
|
