|
Model & Ordering
 |
|
Specification
- Accuracy ( 23 + 5 oC ) : 0.2% RO
- Linearty & repeatability : 0.1% typical
- Temperature stability : Less 0.008% ro per degree C
- Configuration :
- Field rangeability
- Switchable input, span of DCV 10mV to 200V, DCmA of 0.2 to 50mA
- Switchable output over 20 standard signals
- Input resistance - OHM :
- Maximum input over :
- Maximum 300Vrms continuous of > 2V ranges
- Maximum 150V rms continuous of 2V & lower ranges
- Maximum 150mA continuous for all current input
- Power effect : Less 0.003% for per volt change
- Response time & ripple : Less 400ms typically, ripple less 0.1% ro
- Common mode rejection > 120db, DC to 60Hz
- Dielectric strength :
- 2.5KV AC rms 1 minute between terminals to case IEC 688
- 2KV AC rms 1 minute between input / output / power IEC 688
- Impulse & surge test : ANSI C37.90 / 1989, IEC 255-3
- Output drive capability : Maximum 5mA for voltage mode, maximum 10V for current mode
- Storage condition : Temperature range -25 to +70oC, RH 20 to 95% non condensed
- Operating condition : Temperature range -20 to +65oC, RH 20 to 95% non condensed
- Power supply : +20% of rating, less 5VA
- Dimension : W*H*D : 12T (60.6mm) * 3U (128.5mm) * 238mm
|
|
