|
Model & Ordering
 |
|
Specification
- Accuracy ( 23 + 5 oC ) : 0.025% of named frequency + 0.02% RO
- Maximum output load :
- Maximum 10V drive for current output mode
- Maximum 10mA for voltage output mode
- Dielectric strength : 4KV AC rms 1 minute between input / output / power / case IEC 688
- Impulse test : ANSI C37.90a / 1974, IEEE 587 / 1983, IEC 255-3 6KV (1.2 * 50 us)
- Surge test (ring wave) : IEEE 587 / 1983 (3KV~0.5us / 100KHz), IEC 255-3 (2.5KV~0.25ms / 1MHz)
- Maximum input over : Voltage input
- 1.5 * rated / continuous
- 2 * rated / 10 seconds
- Input burden : Voltage / less 0.1VA, self power / less 3VA per element
- Power effect : Less 0.003% for per volt change
- Response time & ripple : Less 400ms typically, ripple less 0.5% ro peak to peak
- Frequency : 50; 60 Hz
- Waveform : Sinusoidal
- Stability :
- Temperature range (-10 to +60oC), long term stabiliy / year
- Maximum 100 ppm degree C, less 0.1% drift
- Output calibration :
- Minimum span +3% / zero +0.5% for 0~1mA type
- Minimum span +3% / zero +3% for 4~20mA type
- Storage condition : Temperature range -25 to +70oC, RH 20 to 95% non condensed
- Operating condition : Temperature range -20 to +65oC, RH 20 to 95% non condensed
- Magnetic field effect : Magnetic field effect, less 0.02% under 100 ampere -turns, at 1M center
- Power dissipation : Maximum 3.5VA
- Dimension : W*H*D : 12T (60.6mm) * 3U (128.5mm) * 238mm
|
|
