Digital Power Meter - MGF

HOME > Power System > Power Meter > Digital Power Meter > Digital Power Meter for Industry > Digital Power Meter - MGF

Model MGF is specially disigned to accept an input signal from pressure sensor as load cell, strain gauge.. or low dc millivolt sensor output. The unit offers very flexible & switchable functions in field application. It features:

1.Designed to accept low DC millivolts range from a minimum span 2.5 mV to a mximum span 110 mV.
2.Switchable input sapn gain & offset capability including coarse & fine adjustment for display range from 0 to + 4000 counts.
3.Providing an exciting voltage of DC 5V / 10V (selectable)
4.Selectable in decimal points.
5.With option outpu either of analog ( per mV per counts)

Digital Power Meter - MGF

 

Features
  • True process dc rate
  • Input of pressure sensor output
  • Rangeable of display scale for engineering unit
  • High accuracy of 0.1%
  • Option of dc linearty output or 24Vdc power output
  • 3-3/4 digits of maximum 3999 counts
  • Dispaly with super rate LED
Model & Ordering

        
Specification
  • Accuracy (23 + 3oC) : 0.1% fs + 1 count
  • Stability : Temp. coeficient < 60 ppm per degree C, long term draft < 0.1% per year
  • Digits & Display : 3-3/4 digits of maximum 3999 counts, 0.56+-super rate LED
  • Input range : Span minimum 0-2.5mV to maximum 0-110mV
  • Configuration :
    • Switchable span gain & offset adjustment for 0 to +-4000 display counts.
    • Selectable of decimal point
  • Exciting voltage : Selectable 5 or 10 DC voltages with load capability, 45 mA maximum
  • Response time : Sample rate 1 of per sec typically
  • Input resistance > 10 Megohms maximum
  • Noise rejection Cmrr > 120db, Nrmm > 100 db
  • Common made voltage : 2KVrms / 1 minute, 50 / 60 Hz
  • Operating condition : -10 to 55oC, 0-99% RH non-condensed
  • Storage condition : -25 to 70oC, 20-99% RH non-condensed
  • Auxiliary power : AC + 15% < 3.5 VA, DC + 20% < 5 watts