Digital Power Meter - MSM / MSN

HOME > Power System > Power Meter > Digital Power Meter > Digital Power Meter for Industry > Digital Power Meter - MSM / MSN

Model MSM is disigned to accept a frequency count input type & MSN for ananalog input type of DC or AC voltage. Both units are with singnal conditioning from customer specified range, according to the used sensors defined to a reading of rpm, speed, fluid etc.

The available customer specified inputs are of wide ranges for model MSM : span from minimum 50Hz to maximum 40KHz of maximum scale of 9999 reading counts, for model MSN span from 100 mv to 1000 vdc or AC vrms with maximum scale of 3999 counts. MSM also provides an exciting DC voltage output, 12 volts, as sensor simultaing source for field application.

Digital Power Meter - MSM / MSN

 

Features
  • True process frequency/ rpm/ speed tate monitor
  • Wide input sensitivity range, 10 mV to 100 V - MSM
  • High accuray of 0.05%
  • 12 V exciting voltage provided
  • 3-4 digits of maximum 9999 conunts
  • Display with wuper rate LED
Model & Ordering

        

Specification
  • Accuracy (23 + 3oC) :
    • 0.05% fs + 2 count for model MSM
    • 0.25% fs + 1 count for model MSN
  • Stability :
    • Temp. coeff. < 25 ppm per degree C, long term draft < 0.002% per year for MSM
    • Temp. coeff. < 60 ppm per degree C, long term draft < 0.1% per year for MSN
  • Digits & Display : 0.56" super rate LED, 9999 counts for MSM, 3999 counts for MSN
  • Exciting voltage : 12 Volt with load capability of 25 mA maximum for MSM
  • Response time : Sample rate 1 of per sec. typically
  • Input signal :
    • MSM-Waveform : unipolar or bipolar, & open collector for MSM
    • MSN DC or AC rms, span minimum 100 mV to maximum 1000V
  • Input over : Maximum 250 vrms or 2 time rated which ever great
  • Noise rejection : Cmrr > 120 db, Nmrr > 100 db for MSN vdc input
  • Common mode voltage : 2 KVrms/ 1 minute 50/ 60 Hz
  • Operating condition : -10 to 55oC, 0-99% RH non-condensed
  • Storage condition : -25 to 70oC
  • Auxiliary power : AC + 5% < 3.5 VA, DC + 20% < 5 watts